Schlage Champagne Right Handed Single Cylinder Keyed Entry Storeroom Door Lever Set with Decorative Andover Trim
Model: F80CHP716ANDRH|Item: bci1857973
Details
Storeroom Function: Schlage storeroom lever sets feature an outside lever that is always locked while the inside knob is always unlocked and free turning. Entry from exterior is only possible via key.
Right Handed: Handing is determined by standing on the outside of a room, facing the door, and noting on which side the door hinges are located. This handle is right handed, and so when standing outside of the room and facing the door the hinges will be on your right.
Product Features:
A Lifetime Mechanical and Finish Warranty gives you the peace of mind that this product will be looking good and functioning smoothly for as long as you own it. (Finish warranty does not include Oil Rubbed Bronze because it is a living finish and it is expected to patina over time)
Installation is easy, all you need is a screwdriver and a little time. The set is designed to fit standard prep doors and most installations should take just a matter of minutes.
BHMA/ANSI Grade 2 certified which indicates excellent performance across a range of residential applications. This product is built from high-quality materials to give you exceptional security.
Specifications:
- Backset: 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4"
- Cross Bore: 2-1/8"
- Edge Bore: 1"
- Door Thickness: 1-1/2", 1-3/4", 1-3/8", 1-5/8"
- Handing: Right
- Handle Design: Champagne
- Trim Design: Andover
- Product Weight: 1.5 lbs
- Latch Faceplate: Drive-in, Square Corner, Round Corner
- Cylinder: 5 Pin Schlage C
- F40-CHP-AND: Privacy Lever Set
- F51-CHP-AND: Keyed Entry Lever Set
- F80-CHP-AND-LH: Left Handed Keyed Entry Lever Set
- F80-CHP-AND-RH (This Model): Right Handed Keyed Entry Lever Set
Dimensions and Measurements
Backset | 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4" |
Cross Bore | 2-1/8" |
Door Thickness | 1-3/4", 1-3/8" |
Edge Bore | 1", 7/8" |
Handle Length | 4.8125 in. |
Handle Projection | 2.4375 in. |
Trim Height | 2.75 in. |
Trim Width | 2.75 in. |
Dimensions and Measurements
Backset | 2-3/4", 2-3/8", Adjustable 2-3/8" or 2-3/4" |
Cross Bore | 2-1/8" |
Door Thickness | 1-3/4", 1-3/8" |
Edge Bore | 1", 7/8" |
Handle Length | 4.8125 in. |
Handle Projection | 2.4375 in. |
Trim Height | 2.75 in. |
Trim Width | 2.75 in. |
Included Components
Cylinder Included | Yes |
Included Components
Cylinder Included | Yes |
Characteristics and Features
Concealed Screws | Yes |
Cylinder | 5 Pin Schlage C |
Function | Keyed Entry, Storeroom |
Handing | Right |
Handle Design | Champagne |
Handle Material | Metal |
Keyway | C |
Latch Faceplate | Round Corner, Drive-In |
Lever Shape | Designer, Wave |
Panic Proof | Yes |
Rosette Shape | Round |
Theme | Transitional |
Trim Design | Andover |
Characteristics and Features
Concealed Screws | Yes |
Cylinder | 5 Pin Schlage C |
Function | Keyed Entry, Storeroom |
Handing | Right |
Handle Design | Champagne |
Handle Material | Metal |
Keyway | C |
Latch Faceplate | Round Corner, Drive-In |
Lever Shape | Designer, Wave |
Panic Proof | Yes |
Rosette Shape | Round |
Theme | Transitional |
Trim Design | Andover |
Warranty and Product Information
ADA | Yes |
ANSI Certification | A156.5 |
Approved for Commercial Use | No |
BHMA Certification | Grade 2 |
Certifications | ANSI |
Collection | Andover |
Fire Rated | No |
Series | F-Series |
Warranty and Product Information
ADA | Yes |
ANSI Certification | A156.5 |
Approved for Commercial Use | No |
BHMA Certification | Grade 2 |
Certifications | ANSI |
Collection | Andover |
Fire Rated | No |
Series | F-Series |