The Revolv RSH3QE4M1SP48 has been discontinued
** See similar or replacement items below **
Revolv AccuCharge® 4.0 Ton Cooling 14.3 SEER2 208 / 234 Volt Single-Stage Heat Pump with FitRight® Fittings
Model: RSH3QE4M1SP48|Item: bci4731550
Discontinued
We still have product details and accessories, scroll down to see them!
Discontinued
We still have product details and accessories, scroll down to see them!
Details
Revolv is all about delivering easier installation, improved energy efficiency, and long lasting performance. What makes Revolv stand out against the rest is its complete AccuCharge® system that delivers a factory precise refrigerant charge so that installers aren't forced to spend hours balancing out the system. All Revolv systems also come with FitRight® fittings that give you a quick easy installation process. If you're looking for a reliable, efficient unit then the Revolv AccuCharge® heat pump is for you.
Features:
- AccuCharge® with FitRight® Fittings
- All AccuCharge® units come with a factory precise refrigerant charge and FitRight® fittings that provide an easy installation. The combination of the two are engineered for superior efficiency and reliability.
- Designed for Manufactured Housing
- The full service brass valves offer simple servicing and easy access to the refrigerant system. The outdoor thermostat required by HUD comes factory installed on the RSH3 heat pumps.
- Corrosion Resistant Finish
- The Revolv AccuCharge® air conditioners are made out of a galvanized steel with a powder coated paint, creating a durable and corrosion resistant finish.
- Composite Base Pan
- A composite base pan is stronger and lighter than your standard steel base pan. The composite base pan absorbs sound better, is corrosion resistant and has molded steps and drainage holes.
- Pressure Switches
- The AccuCharge® heat pumps come with pressure switches to protect your unit against high system pressures, a low pressure switch to prevent loss of charge and an auto-reset feature that prevents unnecessary service visits.
- Condenser Guard
- The RSH3 has a durable, powder coated metal guard and mesh hail guard that protect the coil from extreme weather or objects hitting it and damaging your unit.
- Micro-Channel Coils
- All of the Revolv models have all highly corrosion-resistant aluminum coils, minimizing refrigerant charge and cost.
- Filter Drier
- The Revolv RSH3 models have an included liquid line filter drier to trap moisture and particulates. This must be field installed.
General Information:
- Type: Single-Stage Heat Pump
- Operating Mode: Heating and Cooling
- Installation Location: Outdoor
- Refrigerant Type: R-410A
- DOE Regional Compliance: Nationwide
Performance:
- Cooling Capacity (Tons): 4.0 Ton
- Cooling BTU: 48,000
- Cooling BTU Capacity: 44500
- Heating BTU Capacity: 46500
- Maximum Sound Level: 79 dB
- SEER2: 14.3
- HSPF: 7.5
Electrical Data:
- Voltage: 208, 234V
- Electrical Phases: 1
- Frequency: 60 Hz
- Recommended Breaker Size: 40 A
Dimensions:
- Suction Line Diameter: 7/8"
- Liquid Line Connection Size: 3/8" Inch
- Height: 45-1/4"
- Width: 31-3/4"
- Depth: 31-3/4"
- Shipping Weight: 218 lbs.
Product Assurance:
- Certifications:
- AHRI
- ETL
- Warranty: 5 Year
Dimensions and Measurements
CFM | 1550 |
Cooling Capacity (Tons) | 4.0 Ton |
Depth | 31.75 in. |
Height | 45.25 in. |
Liquid Line Connection Size | 3/8" |
Nominal Depth | 32 in. |
Nominal Height | 46 in. |
Nominal Width | 32 in. |
Suction Line Diameter | 0.875 in. |
Width | 31.75 in. |
Dimensions and Measurements
CFM | 1550 |
Cooling Capacity (Tons) | 4.0 Ton |
Depth | 31.75 in. |
Height | 45.25 in. |
Liquid Line Connection Size | 3/8" |
Nominal Depth | 32 in. |
Nominal Height | 46 in. |
Nominal Width | 32 in. |
Suction Line Diameter | 0.875 in. |
Width | 31.75 in. |
Included Components
Heater Included | Yes |
Included Components
Heater Included | Yes |
Characteristics and Features
Heater Type | Heat Pump |
Refrigerant | R-410A |
Characteristics and Features
Heater Type | Heat Pump |
Refrigerant | R-410A |
Electrical and Operational Information
Breaker Needs | 40 Amps |
BTU Cooling | 48000 |
Cooling BTU Capacity | 44500 |
dBA (High) | 79 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Heating BTU Capacity | 46500 |
Stages | Single Stage |
Voltage | 208, 234 |
Electrical and Operational Information
Breaker Needs | 40 Amps |
BTU Cooling | 48000 |
Cooling BTU Capacity | 44500 |
dBA (High) | 79 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Heating BTU Capacity | 46500 |
Stages | Single Stage |
Voltage | 208, 234 |
Warranty and Product Information
Certifications | AHRI, ETL |
Collection | AccuCharge® |
DOE Regional Compliance | Nationwide |
EER2 | 11.8 |
Manufacturer Warranty | 5 Year |
Outdoor Approved | Yes |
SEER2 | 14.3 |
Warranty and Product Information
Certifications | AHRI, ETL |
Collection | AccuCharge® |
DOE Regional Compliance | Nationwide |
EER2 | 11.8 |
Manufacturer Warranty | 5 Year |
Outdoor Approved | Yes |
SEER2 | 14.3 |