PROFLO Two-Piece Toilet with Elongated Bowl and Left Mounted Trip Lever (Molded Wood Seat and All Installation Components Included)

Toilet Kit Includes:

• Toilet tank and lid
• Elongated toilet bowl
• Molded wood toilet seat and lid
• Installation Kit: Wax ring, supply lines, stop valve and flange/bolt set

Product Features:

• 100% factory flush tested - guaranteed to perform
• Toilet fixture is constructed of vitreous china - a durable porcelain material
• Fully covered under Proflo's fixture warranty for a year after installation
• Two-piece configuration – flexibility in installation and access around the bowl
• Elongated bowl provides an additional 1-1/2” back-to-front compared to round bowls
• Installs in a wall mounted configuration
• Requires a Zurn Z1212 water closet carrier bracket, offered upon ordering
• Siphon jet flushing – water is forcibly siphoned from tank to bowl for a powerful rinse
• Sanitary bar on bowl prevents liquids from traveling under the tank
• Toilet seat and all installation components required are included free

Benefits of Proflo Toilets:

Out of the Box Installation: Going above and beyond with their toilets to ensure you have everything you need to install and begin enjoying your new fixture as soon as it arrives. With the custom fitted toilet seat, tank lever and even the wax ring included there will be no need to run to he hardware store and pick up these extras that most manufacturers do not include.

High-Grade Porcelain: The porcelain compound used in the construction of Proflo toilets is a non-porous semi-flex material that is engineered not to crack or chip over time. The small amount of "give" allows the toilet to endure typical wear and tear without compromising the integrity of the fixture.

Sanitation Bar: Proflo toilet bowls come with an integrated "Sanitation Bar." This raised portion on the back of the bowl prevents water or waste from seeping under the tank where it is difficult to clean.

Product Specifications:

• Overall Height: 31" (measured from the bottom of the base to the highest point on the toilet)
• Overall Depth: 28" (measured from the back of the tank to the front of the rim)
• Overall Width: 15-1/2" (measured from the furthest points left to right on fixture)
• Bowl Height: 16-1/2" (measured from the base to the rim of the bowl)
• Flow Rate: 1.28 gallons-per-flush (EPA WaterSense certified)
• Trip Lever Placement: Left
• Trapway Size: 2" (fully glazed)
• Flush Valve Size: 3"
• Seat Post Holes: 5-1/2" (distance between toilet seat install holes)