Pinkys Iron Doors Bristol Thermally Broken Double Arch 72" x 96" Right Hand Inswing Door with Low-E Glass, Black Hinges and 6"Jamb

Features:

• Jamb is included and packaged separately from the door. Jamb is constructed with 12 gauge tube (above industry standard). Polyurethane foam core is filled in the jamb for greater insulation.
• Steel threshold is included and comes welded on the jamb.
• Tabs come welded on jamb with pre-drilled holes to allow for easy installation.

Door Construction:

• Hinges: Steel weld on bullet hinges with grease fittings come welded on jamb and door. Allows customers to comfortably open the doors, but yet feel that quality with each and every use. Pinky's Iron Doors use welded steel bullet hinge with copper crush washer instead of a ball bearing hinge because ball bearings are made out of stainless steel (hard material) and the hinges/doors are made out of steel (softer material) which over time causes the hinge to wear. With copper crush washers, the washer is the soft point and they are easily replaceable over time if needed.

• Glass: Tempered dual pane glass. There is a spacer in between each 1/4” thick glass that makes the total thickness of the tempered dual pane glass 5/8”. Front exterior side glass is the design glass style you chose and back interior side glass is clear. Customers may swap back glass for design glass with special orders only.

• Weather Stripping: Dual foam weather stripping is included and comes installed around the door frame. Designs with operable glass will have dual sealing around the glass. The purpose is to help reduce air infiltration and water penetration. The dual sealing around the glass allows for weather stripping on both sides of the glass. The seal around the door frames help to reduce the leakage of air and heat, resulting in a much more energy efficient product for Pinky's Iron Doors customers.

Specifications:

• Overall Height: 96"
• Overall Width: 72"
• Door Thickness: 2"
• Bore Hole Configuration: Double
• Bore Hole Center to Center: 5-1/4"
• Cross Bore: 2-1/8"
• Glass Insulation: Dual Glaze Low-E