Metalbest Sure-Temp 6" Dead Soft Base Roof Flashing for 2/12 to 6/12 Pitch

6" Dead Soft Base Roof Flashing for 2/12 to 6/12 Pitch from Sure-Temp

Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow down from the roof and away from the chimney system. It is important to choose flashing that matches the pitch of your roof. This flashing works for 2/12 to 6/12 pitch and has a dead soft aluminum base designed to be molded to uneven roof surfaces. Note: To determine your roof pitch, measure the number of inches from the end of a level 12” ruler down to the roof. This is the rise for 12 inches of run. For example, a rise of 5 inches is a 5/12 pitch.

The Sure-Temp Chimney System is designed to meet the needs of today’s high-efficiency Wood Stoves and other appliances burning wood, oil or gas. Components may be combined in a wide variety of ways to solve almost any chimney installation requirement.

Features:

• Materials: Stainless steel
• Clearance: 2" to combustibles
• Allowable Flue Gas Temperatures:
  • Maximum Continuous: 1,000 Degrees Fahrenheit / 540 Degrees Celsius
  • Brief Forced Firing: 1,400 Degrees Fahrenheit / 760 Degrees Celsius (60 min.)
  • Creosote Burn Out: 2,100 Degrees Fahrenheit / 1,150 Degrees Celsius (3 x 10 min.)
• Dead soft aluminum base for uneven surfaces
• UL Listed: UL-103-HT
• Note: For a 5" chimney use this flashing with 5/6 inch storm collar
• Warranty: Lifetime Limited Warranty