Little Giant 50 GPM Automatic Submersible High Temperature Effluent Pump
Model: 506600|Item: bci912519
$944.63
Finish: Steel -
Special Order
Details
50 GPM Automatic Submersible High Temperature Effluent Pump
This high temperature version of the 6E Sump/Effluent Pump is capable of pumping heated liquid up to 200°F liquid. Uses include boiler blow-down sump pits, rendering plant wash-down sump pits, public utility underground transformer vaults, industrial steam cleaning sump pits, etc. These pumps handle liquids and solid waste materials up to 1/2" in diameter. Pumps feature a 1-1/2" discharge, with a lift of 20'. Cast iron housing and volute with protective epoxy coating, high-temperature thermoplastic base and vortex nylon impeller.
- Handles liquids up to 200° F
- 1/2" solids handling capability
- Cast iron pump housing with protective epoxy coating for corrosion resistance
- Oil-filled motor housing for lifetime lubrication and rapid heat dissipation
- Integral mechanical float switch
- Stainless steel screws, bolts and lifting ring to protect against corrosion
- Mechanical seals (stainless steel spring, Carbon and Ni-Resist faces) to assure maximum protection against pump failure
- Bearings: Upper and lower sintered sleeve bearings for extended motor life
- Thermal overload protection
- Automatic operation has 10" to 12" "On" level range
Dimensions and Measurements
Cord Length | 15 in. |
Depth | 8.7 in. |
Discharge Diameter | 1.5 in. |
Flow Rate by Feet of Head | 42 gal / 10 ft, 50 gal / 5 ft, 27 gal / 15 ft |
Height | 10.9 in. |
Length | 8.8 in. |
Maximum Diameter Solids | 0.5 in. |
Maximum Head Height | 20 in. |
Minimum Head Height | 5 in. |
Product Weight | 32 lbs. |
Shut Off Height | 20 in. |
Shut Off Pressure | 8.7 |
Water Connection | 1-1/2" |
Water Pressure (Max) | 8.7 PSI |
Width | 8.5 in. |
Dimensions and Measurements
Cord Length | 15 in. |
Depth | 8.7 in. |
Discharge Diameter | 1.5 in. |
Flow Rate by Feet of Head | 42 gal / 10 ft, 50 gal / 5 ft, 27 gal / 15 ft |
Height | 10.9 in. |
Length | 8.8 in. |
Maximum Diameter Solids | 0.5 in. |
Maximum Head Height | 20 in. |
Minimum Head Height | 5 in. |
Product Weight | 32 lbs. |
Shut Off Height | 20 in. |
Shut Off Pressure | 8.7 |
Water Connection | 1-1/2" |
Water Pressure (Max) | 8.7 PSI |
Width | 8.5 in. |
Characteristics and Features
Automatic | Yes |
Configuration | Sump / Effluent Pump |
Impeller Material | Nylon |
Material | Cast Iron |
Material Casing | Iron |
Material Housing | Iron |
Shutoff Head in Feet | 20 |
Submersible | Yes |
Switch Type | Mechanical Float |
Water Connection Type | NPT |
Characteristics and Features
Automatic | Yes |
Configuration | Sump / Effluent Pump |
Impeller Material | Nylon |
Material | Cast Iron |
Material Casing | Iron |
Material Housing | Iron |
Shutoff Head in Feet | 20 |
Submersible | Yes |
Switch Type | Mechanical Float |
Water Connection Type | NPT |
Electrical and Operational Information
Amperage | 10.1 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 0.33, 0.34 |
Maximum Fluid Temperature | 200 °F |
Voltage | 115 |
Wattage | 735 |
Electrical and Operational Information
Amperage | 10.1 |
Electrical Phases | 1 |
Frequency | 60 Hertz |
Horsepower | 0.33, 0.34 |
Maximum Fluid Temperature | 200 °F |
Voltage | 115 |
Wattage | 735 |
Warranty and Product Information
Approved for Commercial Use | Yes |
Certifications | CSA |
Warranty and Product Information
Approved for Commercial Use | Yes |
Certifications | CSA |
Related Little Giant Categories
Reviews
(0)