Shipping to:Hilliard, OH
Little Giant 1/40 HP 300 GPH 115 V Parts Washer Pump with 6ft. Power Cord - No Plug
Model: 502020|Item: bci911857
$172.95
Finish: Steel -
Special Order
Details
1/40 HP 300 GPH 115 V Parts Washer Pump with 6' Power Cord - No Plug
Designed for submerged use only, this pump is intended for use in UL-listed parts cleaners. For pumping unheated metal parts cleaning solvent which is UL classified as PJQU, as described in the Gas and Oil Equipment Directory. These refined petroleum distillates are free from tendency to heat spontaneously; they have a closed cup flash point not lower than 100 degrees F.
- 1/2" MNPT conduit fitting
- 1/40 HP oil-filled motor
- 300 GPH @ 1' maximum flow rate
- Intermittent liquid temp. to 120F
- Cast aluminum housing
- Hooded intake
- 1/4" MNPT discharge
- Nylon volute & impeller
- Viton(R) shaft seal
- Nylon screen
- Thermal overload protection
Dimensions and Measurements
Cord Length | 72 in. |
Depth | 5.5 in. |
Discharge Diameter | 0.25 in. |
Flow Rate by Feet of Head | 5 gal / 1 ft, 3.42 gal / 5 ft, 4.25 gal / 3 ft |
Height | 5.6 in. |
Product Weight | 4.83 lbs. |
Shut Off Height | 11.8 in. |
Shut Off Pressure | 5.1 |
Width | 3.5 in. |
Dimensions and Measurements
Cord Length | 72 in. |
Depth | 5.5 in. |
Discharge Diameter | 0.25 in. |
Flow Rate by Feet of Head | 5 gal / 1 ft, 3.42 gal / 5 ft, 4.25 gal / 3 ft |
Height | 5.6 in. |
Product Weight | 4.83 lbs. |
Shut Off Height | 11.8 in. |
Shut Off Pressure | 5.1 |
Width | 3.5 in. |
Characteristics and Features
Configuration | Specialty Pump |
Material | Nylon |
Submersible | Yes |
Characteristics and Features
Configuration | Specialty Pump |
Material | Nylon |
Submersible | Yes |
Electrical and Operational Information
Amperage | 1.7 |
Frequency | 60 Hertz |
Horsepower | 0.025 |
Voltage | 115 |
Wattage | 100 |
Electrical and Operational Information
Amperage | 1.7 |
Frequency | 60 Hertz |
Horsepower | 0.025 |
Voltage | 115 |
Wattage | 100 |
Related Little Giant Categories
Reviews
(0)