Kohler Load Shed Kit for RXT / RDT Automatic Transfer Switch (without Load Center)

Features:

Kohler Load Shed Kit (Mounts Inside Auto Transfer Switch)
• RDT/RXT Automatic Transfer Switch (without load center)
• RDT 200A Service Entrance with 42 Circuit Load Center
Helps Manage Higher Electrical Loads
• Allows you to use a smaller generator for your home
• Circuits may by cycled on and off to prevent overloading
Automatically Manages Up To Six Residential Loads
• Two HVAC relays to control two independent air conditioner loads
• Four customer-provided power relays can be connected for
• Management of non-essential loads
Intelligent Load Management
• Disconnects non-critical loads to prevent generator overload
• Monitors generators current and frequency to prevent voltage drop
Priority Setting
• Loads are shed according to their priority
• Less critical loads can be turned off automatically
• Load priorities are hard-wired at installation
Kohler Single-Phase Gen With RDC2/DC2 Controller Required
14/20RESA, 14/20RESAL, 14RESAL-200, 20RESAL-SA6, 38RCL and 48RCL
*Please See Spec Sheet For Additional Information*

Specifications:

• Product Category: Generator Accessory
• Type: Control Modules