Ives 3/4" Brass Offset Pivot Set 700 Pound Maximum Load
Model: 7227SET10B|Item: bci535922
Details
3/4" Brass Offset Pivot Set 700 Pound Maximum Load
This 3/4" brass offset pivot set 700 pound maximum load is non-handed and is UL listed for 20 minure rated doors. It is well built and is used on doors with a maximum load of 700 pounds!.
Features:
- Non-Handed 3/4" Off Set Pivot Set Consisting of a Jam Mounted 7227 Bottom Pivot and a Head Frame Mounted 7227 Top Pivot
- Door Thickness Minimum of 1 3/4"
- Center Line Off Set 3/4" From Face of Door and 3/4" From Edge of Door
- Maximum Load of 700 Pounds
- UL Listed for 20 Minute Rated Door
- Vertical Adjustment Range of 3/16" Which Includes a Positive Locking Feature
- Optional 7227-Int Intermediate Pivot Carries Up to An Additional 100 Pound Load Or Needed for Doors Over 7 Feet
- Optional 7227-Pt Power Transfer Intermediate Pivot Provides 4 Wire Transfer with No Weight Bearing Capabilities
- Call for Dimensions
IVES has produced a full line of quality building hardware for over 120 years Throughout this time, IVES has adhered to the firm convictions of its founder, Hobart B Ives, that the success of a company is dependent on two major factors — product quality and customer service Today, IVES reputation is known for these core principles Emphasis is also placed on application flexibility and value IVES extensive hardware line includes a variety of pivots, flush bolts, push/pull handles, kick plates, doorstops, hinges and more
Dimensions and Measurements
Door Thickness | 1-3/4" |
Dimensions and Measurements
Door Thickness | 1-3/4" |
Characteristics and Features
Handing | Left, Reversible, Right |
Characteristics and Features
Handing | Left, Reversible, Right |
Warranty and Product Information
ANSI Certification | A156.4 |
Approved for Commercial Use | No, Yes |
BHMA Certification | Grade 1 |
Certifications | ANSI, UL |
Warranty and Product Information
ANSI Certification | A156.4 |
Approved for Commercial Use | No, Yes |
BHMA Certification | Grade 1 |
Certifications | ANSI, UL |