INOX Sunrise Passage Door Lever Set with 2-3/8 Inch Backset, SE Series Square Rose, and TL4 28 Degree Latch

Passage: Passage door hardware has no locking mechanism. Both the interior and exterior handles are always free making it perfect for hallways, closet doors, and anywhere else a lock isn't needed. Passage door hardware can also be used in conjunction with a deadbolt to secure a back door or entrance.

Features:

• INOX MicroArmor™ antimicrobial coating inhibits or kills up to 99.9% of microbes on the surface, including e-coli, salmonella, strep, and MRSA; provides 24/7 continuous protection against bacteria, mold, and mildew
• Silver ion technology is infused in the coating; silver ions have an extensive history of effective use as an antimicrobial treatment, are BPR (Biocidal Products Regulation) listed and EPA approved
• MicroArmor has been successfully tested to JIS Z 2801 standards for antimicrobial activity and efficacy, is abrasion and corrosion resistant, and is MADE IN USA
• 304 grade ANSI certified Stainless Steel for long life, strength, and durability
• Standard square corner latch faceplate
• Concealed screws for a beautiful finished look
• Three hour rated Fire Exit Hardware
• Exceeds criteria for BHMA Grade 2 certification
• Complies with standards of the Americans with Disabilities Act (ADA)
• Covered under INOX's Limited Lifetime, Limited Lifetime Finish, and Limited Lifetime Mechanical Warranties

Specifications:

• Backset: 2-3/8"
• Cross Bore: 2-1/8"
• Edge bore: 1"
• Door Thickness: 1-3/8" to 1-5/8"
• Handing: Reversible Left or Right
• Handle Length: 5-1/16"
• Handle Projection: 2-1/8"
• Trim Width: 2-3/8"
• Trim Height: 2-3/8"
• Product Weight: 2.5 lbs
• Latch Faceplate: Square Corner