Hafele EKU Porta Milling Jig for Sliding Glass Door System
Model: 941.00.095|Item: bci1785959
Details
This milling jig is used with the fascia and profiles in the EKU Porta top hung system.
The EKU Porta 100/GWF Series is for 1 or 2 sliding glass doors, and a combination of sliding and fixed glass, and features simple installation and a suspension with a clamping shoe. No glass cut-outs are required and vertical adjustments can be made without removing the glass door. When using two sliding doors on the same track, make sure they do not collide by using a lower guide channel with a door stopper or protective edge trim.
Specifications:
- Maximum door weight 220 lbs. (100 kg)
- For door thickness 5/16" to 1/2" (8 - 12.7 mm)
- Door up to 8' 10.25" (2700 mm) height x 5' 3" (1600 mm) width
Hafele is committed to finding better ways and it shows in their innovative and beautiful line of door hardware products. These products will lead to better organization and the peace of mind that comes with Hafele brand products. In addition to quality and beauty, Hafele is committed to reducing their environmental impact, so you can buy these products with confidence in every aspect.
Dimensions and Measurements
Door Thickness | 1/2", 3/8", 5/16" |
Max Door Weight | 220 lbs. |
Max Door Width | 63 in. |
Dimensions and Measurements
Door Thickness | 1/2", 3/8", 5/16" |
Max Door Weight | 220 lbs. |
Max Door Width | 63 in. |
Warranty and Product Information
Approved for Commercial Use | No |
Collection | EKU Porta |
Warranty and Product Information
Approved for Commercial Use | No |
Collection | EKU Porta |