DiversiTech 3" SpeediChannel Duct Bend for Air Conditioning Line Set Cover System

SpeediChannel Collection 3" SpeediChannel Line Set Cover Duct Bend

The duct end is used to terminate a run of SpeediChannel™ to a small opening – just large enough for the line set and condensate drain line to pass through. Gives a neat/clean appearance to the installation.

DiversiTech SpeediChannel™ is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip™) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. Manufactured from rigid PVC, the SpeediChannel™ system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi-Channel™ system can be painted as desired to match any wall color. The PVC used in the SpeediChannel™ system is resistant to UV light, and is UL rated.

Features:

• SpeediClip slides into place allowing single person installation
• Paintable for custom appearance
• Natural color blends with almost any construction aesthetic
• Flat bottom channel sets on surfaces and corners better
• Stainless steel screws will not rust
• Aesthetically pleasing flat escutcheon option
• For 3" channel width

Specifications:

• Mini Split System with 3/8" insulation:
• Liquid Line: 3/8"
• Suction Line: 5/8"
• Drain Hose: 3/4" OD
• Conventional Split System with 3/8" insulation on suction line:
• Liquid Line: 3/8"
• Suction Line: 3/8" or 7/8"
• Drain Hose: 3/4" PVC
• Meets UL 94V.-0 Fire rating
• Temperature: -4°F to 140°F
• Tested to over 2,000 hours

• DiversiTech is committed to do what it takes to deliver world class service and products. They are proud to provide products that they believe will outshine the competition in convenience and innovation.