Design House Cambridge Single Cylinder Keyed Entry Door Knob Set with Round Rose

The Design House 726927 Cambridge Entry knob is designed for left or right hand doors. The popular styling of the clean-lined knob is easily incorporated into any architectural styles and will add a touch of elegance to your decor. This knob fits the two most common backsets in the U.S. (backset is the distance from the edge of the door to the center of the bore hole), which are 2-3/4-inch and 2-3/8-inch. The full 1/2-inch throw is plated in nickel and does not budge once in place. With security in mind, this knob accepts a key on the exterior but is operated by a turn-button knob on the interior. Entry levers are often used on front doors and back doors. Use this handle on standard 1-3/8-inch and 1-3/4-inch thick doors. This product has a 1-inch by 2-1/4-inch radius corner face plate and 5-pin security. If you are preparing your door for installation, the cross bore should be 2-1/8-inches (54mm) in diameter and the edge bore should be 1-inch (25mm) in diameter. This product is ANSI Grade-3 certified, which means it is rated for residential security. Designed and manufactured by Design House, the trusted source for quality lighting, hardware, plumbing, kitchen, and bath products for every taste and budget.

Single Cylinder Keyed Entry: Single cylinder keyed entry door hardware is locked and unlocked from the exterior using a key and can be locked and unlocked from the interior using the locking mechanism. Perfect for securing entrances, side doors, and anywhere else that needs a bit more security.

Features:

• Tested to exceed ANSI/BHMA Grade 3 security requirements
• Constructed of solid brass for durability and dependability
• Installs easily with all necessary mounting hardware included
• Covered by Design House's 5 year limited manufacturer warranty

Specifications:

• Backset: Adjustable 2-3/8" or 2-3/4"
• Cross Bore: 2-1/8"
• Edge Bore: 1"
• Door Thickness: 1-3/8" to 1-3/4"
• Handing: Reversible Left or Right
• Handle Width: 2-9/16"
• Handle Height: 2-5/8"
• Handle Projection: 2-13/16"
• Trim Width: 2-5/8"
• Trim Height: 2-5/8"
• Product Weight: 1.34 lbs.
• Latch Faceplate: Round Corner
• Cylinder: 5 Pin KW1