Craftmade Bloom 52" Indoor Ceiling Fan - Remote and Light Kit Included - Requires Blade Selection

Craftmade Bloom Ceiling Fan

Whimsical and endearing, the Bloom 52" ceiling fan will inspire her to blossom. The captivating upper and lower blades rotate independently and can be customized in 4 adorable combinations – pink and green, translucent teal and cherry, pink and white, and black and translucent. At 52” in diameter, the silent 3-speed reversible motor and glowing integrated light add even more charm. Plus, with the Intelligent Control System (ICS) remote control, this fan can grow right along with her. Blades sold separately.

Included Components:

• Remote Control and Wall Control
• Heavy-Duty, 3-Speed Reversible Motor
• Integrated Light Kit (Non-Dimmable)
  • 2 x 13 Watt GU24 CFL Bulbs Included

Features:

• Lifetime Limited Warranty
• Remote control
• Can be installed on sloped ceilings

Blade Specifications:

• Blade Span: 52"
• Number of Blades: 10
• Blade Pitch: 13.5°
• Blades Included: No

Motor Specifications:

• Amperage: 0.42 A
• Motor Type: AC Induction
• 188mm x 15mm
• Reversible Motor: Yes
• CFM (High): 4202
• RPM (High): 162
• Voltage: 120 V

Sloped Ceiling Specifications:

• For ceilings with slope from 35° to 45°, use the 45AD angled ceiling adapter

High or Low Ceiling Specifications:

• The Bloom is designed for installation on standard 8 to 9 foot ceilings. If your ceiling is higher, you'll need to purchase an additional downrod. The rule of thumb is that ceiling fans should have a minimum of 7 feet and a maximum of 9 feet of clearance between the bottom of the fan and the floor in order to circulate air efficiently. If you have a low ceiling, purchase the CMA flush mount adapter to reduce the hanging height of your fan.

Suggested Downrod Lengths:

• 9 Foot Ceiling: 6" - 12"
• 10 Foot Ceiling: 12" - 18"
• 11 Foot Ceiling: 18" - 24"
• 12 Foot Ceiling: 24" - 36"
• 13 Foot Ceiling: 36" - 48"
• 14 Foot Ceiling: 48" - 60"
• 15 Foot Ceiling: 60" - 72"
• For ceiling heights greater than 15 feet, you'll need to purchase the downrod Coupler to join two downrods together.