Baldwin Right Handed Lever Strength Fail Secure Electrical Mortise Lock with 2-3/4" Backset

Right Handed Lever Strength Fail Secure Electrical Mortise Lock

• Fail Secure electrical mortise lock with 2-3/4" backset
• Lever x Lever
• Baldwin mortise locks are reversible in the field if needed
• Latch bolt by knob either side ONLY when solenoid is energized.
• Latch bolt retracted by key outside and knob inside when solenoid is NOT energized.
• Inside knob is always free
• Auxiliary Latch deadlocks latch bolt.
• Power off locks outside knob
• Two keys will be shipped per lock. Three or more items keyed alike will ship a total of 6 keys

Electrical Specifications:

Rated Voltage:

24V AC / 24V DC - AC/DC Converter is built inside

Operating Voltage Range:

22-26V AC/V DC

Test Voltage:

18V AC/V DC

Rated Current:

0.35 Amperes (0.4 Amperes Maximum)

Duty:

Continuous

Solenoid Lead Wire Length:

6"

Important Feature:

Facilitate installation, Solenoid is constructed inside the lock case.

Important Notes:

1. Each electrified lock should have its own 24 volt transformer. Two or more locks may be operated in PARALLEL from a single transformer with the proper current rating. DO NOT connect locks in a series from a higher rated transformer.

2. We DO NOT recommend wiring electrified locks to a circuit containing electromagnetic devices as transient voltage can cause damage to the lock. Transient voltage must be suppressed at its source before connecting locks to the circuit.

3. A Varistor at 35 volts (peak-recurrent) may be used for transient voltage protection. 1-hole for latch bolt - Electric strike not available - must order 3rd party