American Standard Madera 1.28 GPF Elongated One-Piece Toilet With Top Spud and Selectronic Flushometer - Less Seat (5901100.020)

Product Features:

• Fully covered under a 1-year warranty
• Quick, quiet flushing - American Standard toilets are famously efficient and hushed
• Industry-leading flushing system out-performs older toilets while using less than 1/2 the water
• Elongated bowl shape - more comfortable than a round bowl
• One-piece toilet – seamless, easier to keep clean; lends to a more refined look
• Chair-height bowl – easier to sit and stand; appropriate for adults and the elderly
• Top-spud flushometer triggers flushing
• Perfected porcelain casting process and adjustable tank anchors
• Straight-forward installation instructions are included with each toilet
• 100% factory flush tested - guaranteed to perform
• Less Seat - 5901100.020

Product Technologies / Benefits:

• Powerful Siphoning Water Jet – A perfectly positioned water jet captures the circular flow of water for optimal performance with minimal energy loss (water doesn’t hit a flat spot and slow down). As waste and water exit, they are siphoned into the trapway for an unmatched push/pull one-two punch.
• 2-1/8" Fully Glazed Trapway – Waste and water exit the toilet through a trapway that is fully glazed, which seals it and provides for a smooth surface that waste can in no way cling to. The 2-1/8” diameter chute, while slightly narrower than the American Standard Champion flushing system’s 2-3/8” trapway, can still flush up to 150 feet of toilet paper without clogging. Not that you’ll ever use that much.
• Right Height – Right Height bowls lift the sitting-height an additional 1-1/2 inches off the ground for a more comfortable seated position that is easier to get in and out of. This feature is particularly well liked by men, taller women, and the elderly.

Product Specifications:

• Overall Height: 32-5/8" (measured from the bottom of the base to the highest point on toilet)
• Overall Length: 28-1/4" (measured from back of the fixture to front of the rim)
• Overall Width: 14" (measured from furthest point left to furthest point right)
• Bowl Height: 16-1/2" (measured from bottom of base to bowl rim)
• Rough In: 10" - 12" (measured from wall behind toilet to center of waste outlet in floor)
• Trapway Size: 2-1/8" (diameter of outlet for water/waste exiting the bowl)
• Flow Rate: 1.28 GPF (gallons-per-flush)
• Water Area: 10" X 12"
• Spud Placement: Top